Juke Box E Turntable

Price Hidden

Product Description

Juke Box E is a record player, phono stage, Bluetooth receiver, line pre-amplifier and power amplifier in one. Simply connect a pair of speakers and you have a complete high-performance audio system. If you thought that a starter turntable system is complicated to set up, Juke Box E proves the contrary. This fantastic sounding belt-drive deck offers the fastest possible installation process because it comes pre-adjusted out of the box and offers superb sound quality. Tracking force and anti-skating are carefully set at the factory. An acrylic dust cover is included.

Product Details

Materials
Multi Density Fiber (Mdf)
Measurements
16.3"L x 13.1"W x 4.6"H
OriginCzechia

— Warranty: Manufacturer's 2 Years
— Compact Music System With Turntable, Bluetooth Receiver And Spare Input
— Instant Playback With Super-easy Setup
— High Contrast Display On Top
— Bluetooth Input And 1 Line Input
— Line/record Output
— Gold-plated Sockets
— Pre-adjusted Tracking Force & Anti-skating Force
— Ortofon OM5e Cartridge, Pre-mounted
— 8.6” Aluminum Tonearm With Sapphire Bearings
— Belt Drive With Silicone Belt
— Low Vibration Synchronous Motor & DC Power Supply
— Special Feet For Effective Decoupling
— IR Remote Control Included
— Dustcover Included
— Handmade In Europe

Technical Specifications
— Nominal Speeds: 33/45 R.p.m.
— Speed Variance 33: ±0.80%, 45: ±0.70%
— Wow And Flutter 33: ±0.29%, 45: ±0.27%
— Signal To Noise: 65dB
— Effective Tonearm Mass: 88.0g
— Effective Tonearm Length: 8.6″ (218.5mm)
— Overhang: 22.0mm
— Replacement Battery (remote Control): 2 X AAA
— Power Consumption: 4.5W
— Outboard Power Supply: 24V/4A DC
— Power Output: 2 X 50W At 4 Ohms
— Signal To Noise: 75dB
— Volume Control : 2 Step
— THD +N: 0.5% At 1kHz, RL = 8 Ohms, P = 1W
— Crosstalk: -80dB
— Phono Amplifier: Moving Magnet (MM)
— Phono Gain: 43dB
— Line Level Inputs: 2 Pairs RCA
— Amplifier Gain: 32dB
— Bluetooth: 2.1 + EDR
— Treble Equalizer: +/- 12dB
— Bass Equalizer +/- 12dB

FAQ

Will it play via Bluetooth Speakers?

It won't. Juke Box E has a Bluetooth input so you can wirelessly play music from your phone or such, but no Bluetooth output.

Are there specific type speakers I should look for (& shouldn’t) than Bluetooth?

The unit actually requires conventional speakers (wired). The Bluetooth you see is an input, not an output. This means you can, for example, play music through the system wirelessly with your phone.

If I play a record, will this play over my Sonos (wifi) speakers?

This would work only if your Sonos hub has a line-level audio input. You would connect the line-out jack to that input, usually with an RCA to 1/8" cable.

Is the turntable fully automatic, semi-automatic, or manual?

Juke Box E is fully manual.

Does this come with extra tone arm needles? Also, does the turntable automatically start when the tone arm is lifted up?

It does not include spare needles, just the one installed.
There is no auto start nor stop, but the 'table uses a dampened cuing lever for easier arm raising/lowering.

Can you add a sub?

It would depend on the sub! With the line output jack and the correct cable, a sub can be used.